Difference between revisions of "Laser Cutter"
From robotics
(→Reserving the laser cutter) |
(→Approved Materials for laser cutter) |
||
| Line 3: | Line 3: | ||
==Approved Materials for laser cutter== | ==Approved Materials for laser cutter== | ||
| − | Acrylic | + | *Acrylic |
| − | Delrin (Acetal copolymer) | + | *Delrin (Acetal copolymer) |
| − | Wood and paper based materials such as birch, balsa, or vanilla folder. (not plywood) | + | *Wood and paper based materials such as birch, balsa, or vanilla folder. (not plywood) |
| − | Cloth | + | *Cloth |
==Reserving the laser cutter== | ==Reserving the laser cutter== | ||
Revision as of 17:10, 31 August 2014
The Laser cutter located in Washburn manufacturing laboratory and is available for use whenever a lab monitor is on duty. Please read the lab policies and guidelines on the manufacturing labs my.wpi.edu site.
Approved Materials for laser cutter
- Acrylic
- Delrin (Acetal copolymer)
- Wood and paper based materials such as birch, balsa, or vanilla folder. (not plywood)
- Cloth
Reserving the laser cutter
Reserving the laser cutter gives you priority but it is frowned upon to reserve the laser cutter for more than 2 hours at a time.
1. Go to http://www.wpihtec.org.
2. Login using your WPI credentials.
3. Click on "Machinetool Schedule".
4. Then add a calendar event to the calendar and select "laser cutter" along with persons name and projects name.
Laser cutter manual
Complete instructions for using the laser cutter.
